Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Issue: some of AP3802 ping so high.The wlc 2504 version 8.5.161.0. On the wlc web page-wireless-all aps-ap5~8 both display radio1 is down and not support. AP NameTypeinterface power inlineSSID2.4G5GPING gatewayPING InternetOperationAP11832i15Wtestupu...
Hi everyone,This is my first time configuring WAP581, I need your help!Both ports are connected to the POE switch, but only a 169.254.163.211 address is displayed through the packet capture, and FINDIT has not been able to find any device. The device...
Hi all,Recently encountered a problem, the AP will suddenly be collectively disconnected, and the controller cannot be managed by logging in to the web. At the beginning, it took about 1 hour to complete the ap registration. Now the registration is c...
I have encountered exactly the same problem, and it has been solved.Connect to the AP through the console line, then change the year of the time to the past on the WLC, and wait for the AP re-join process. If it still fails and there is a prompt fo...
As you say have been resolved, there is a new problem, the client response is slow while roaming. How to disable the situation where the signal is good but the rate is very low, such as showing that 5Mbps actually cannot access the Internet.
Yes,I found that products 3802i and 1832i are from different regions.What can I do now.Add the both codes at wireless-country-selection or change something in the APs 3802i ?
