Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our 2504 WLC keeps trying to boot after loading the OS (8.0.110.0). Device had worked for over a year and then apparently died on July 6. We have tried booting from both OS images on the box. Please see the attached log that displays as soon as the ...
We had a 2504 WLC die (alarm stays lit, will not boot from either image on the box), that has two AIR-CAP2602 LAPs connected. No mobility group was set up. How can we get the LAPs to temporarily connect to another 2504 WLC across the WAN while we g...
Currently we have two separate LAN infrastructures each using only VLAN 1. Each LAN has a unique IP address subnet.This is a campus environment. There is now a need to connect a small building on the campus that will have a few devices on one LAN a...
We recently deployed a 3020 concentrator and the 4.0.2 (B)VPN client (used with Windows 2000). It was originally configured to only support IPSec connections over UDP 10,000.Then, we had a new requirement to support several users behind the same Int...
Thanks so much for the quick answer. Since the device does not give me a prompt, I presume I would upgrade the firmware using the Boot Loader Menu, right? How would I upgrade the "FUS" code? If you can direct me to a document, that would be great....
Paresh,Your solution worked! Thanks!Now the only detail is the message "%CDP-4-NATIVE_VLAN_MISMATCH" that is now logged on each end of the fiber link every 60 seconds. I did some investigation to see how to supress the message but did not find anyt...
Thanks for the quick response. Just to make sure I understand... currently we have two separate LANs (Office and Production) each only using VLAN 1. On the 3524 in the new building, configure VLANs 100 and 200 and assign the necessary ports to the ...
Thanks for the suggestion. I opened a TAC issue and was told that you cannot force the client to only use UDP 10,000. So I am working with the other company to open port UDP 4500 on their firewall to allow this user to connect to our concentrator f...
We have only one group configured that authenticates via an external RADIUS server. That group is configured for IPSec over UDP (port 10000). NAT-T was enabled under Tunneling Protocols / IPSec / NAT Transparency. This is a global function and aff...
