Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All expert,I was trying to implement this feature in our environment, so that I configure my 2 routers with this feature. I'd configure a loopback interface for the tracking IP. But when the primary link (route) is fail, it can't output the traffi...
Hi Expert,Anyone ever deploy the Cisco Aironet AP with WPA2 encryption + PEAP-MS-CHAP-V2 authentication in Windows IAS Server before? Where can I find the information about the configuration guide?Can it using VLAN as well in this implementation?Plea...
Hi All Expert,I have a setup which running VPN Client to LAN & DMZ, but it seem like my client only able to access LAN but not DMZ.On my DMZ, I have another router connected lease line to other branch, I wish to access to the remote segment over my b...
Hi Expert,I'd setup a Cisco 1841 router with SDM, everything work fine. But when I wish to access SDM from outside, it seem like I can't access to https, I didn't enable the firewall feature, and I configure the ACL from outside to router outside int...
Hi jitesh,Yes, I'd try this, but the object tracking will sometime up & sometime down status when I show "show ip route track-table".I can't figure out why the tracking will still up even I shut down the interface.Here I attach the rest of the router...
Yes, correct.Can you please kindly point me my error on the configuration?Because the first link down, second link can't ping to destination. But from the routing table I can see the second route was in place.Please help.
