Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm a Cisco employee so you can say I'm professional, but this really puzzles me: I have this Cat 6506 switch with SUP720 and latest image. It takes WISM card but not WLSM, the error msg being "unsupported". I'm using 15.1(2)SY3 image and used 12.2.3...
I'm a Cisco employee so you can say I'm professional, but this really puzzles me: I have this Cat 6506 switch with SUP720 and latest image. It takes WISM card but not WLSM, the error msg being "unsupported". I'm using 15.1(2)SY3 image and used 12.2.3...
Folks: I have this Cisco 2901 configured with PPPoE and IPv6 and connect it through a CO (DSLAM) to an Actiontec xDSL router. PPPoE connections are on FE0/0/0, through virtual template. The Actiontec router gets NA and PD addresses succesfully and LA...
I have a 7206VXR which connects to a DSLAM via the router's ATM/DS3 interface. A CPE home router connects to the DSLAM. So it's like:PC -----ethernet---- CPE Router ------ dsl line ------ DSLAM ----- atm/pppoe ------- BVI/Virtual-Template/PPPoE on Ci...
Thanks Andrew for your response and sorry for the confusion: actually I didn't include all my config lines. For bridging, actually I did what you mentioned and everything works fine with IPv4:interface ATM1/0.3 multipoint description Public DHCP brid...
