Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,One one of my Cisco 831 router at customer end, log shows following - Nov 2 01:47:07.517: [0]PPPoE 4944: Vi1 I FSNov 2 01:47:07.565: [0]PPPoE 4944: Vi1 I FSNov 2 01:47:07.685: [0]PPPoE 4944: Vi1 I FSNov 2 01:47:07.685: [0]PPPoE 4944: Vi1 I...
hi All,This is very urgent.What should be the clock settings for E3 controller which is at Provider Edge (PE)and clock settings for E3 which is at Customer edge (CE).kindly reply at the earliest.RegardsSam
Hi All,At one of my customer we have Cisco 3700 series router with E3 card installed. Customer is having a 15Mb FR link via this E3. We have found from the router log, E3 card flaps continuously. The clock spurce on CE side is Line where as on PE sid...
Hi AllDoes anyone know part code for cable that connects DS3 interface/port and MUX on Cisco 7600 series routers?This is urgently required. So reply ASAP.thanks in advanceRegardsSameer
Hi,I am coming across a typical problem regarding Frame Relay configuration.One of my client is having a sub site connecting to main site router via a Frame Relay provider network.Frame Relay is configured as point to point sub interface end to end.F...
Dear G,I wanted to know what clock settings should be set on PE and CE side? like clock source should be line or internal on e3 controllers...ThanksSam
We want to enable RADIUS authentication on the local LAN using FreeRADIUS or Microsoft IAS.Once authenticated with RADIUS, the client PC should get a dynamic IP address based on the VLAN configuration.We are using Cisco 3550 switch.What configuration...
