Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Problems authenticating clients via LDAP authentication for WLAN 802.1.
It is not possible to authenticate users directly to the DA via LDAP.
The steps of the guide are followed but the integration is not achieved. https://www.cisco.com/c/en/us/supp...
Hi All,
The question is the following: The AP joins correctly to the WLC 9800 with version 17.9.3 but when validating the radios are inOperation Status DOWN.
The model of the AP is CW9164I.
The policy and Tag are correctly configured as well as the c...
When trying to modify the configuration of the 2.4GHz radios in the APs, the gui interface does not open, it keeps loading... in the 5 Ghz band it does load. has this ever happened to anyone?
is tested in other browsers and the same thing happens,
...
I get this alert, how can I correct it?
*May 15 15:57:21.482: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.
Buen día,
Actualmente tengo un problema al tratar de unir un AP 2702i a una WLC Mobility Express Modelo: AIR-AP1852I-A-K9 con version de IOS: 8.10.151.0.
revisando la matriz se observa que este modelo de AP 2702i si es compatible con IOS: 8.10.151.0
...
Hi
aydinkocak
the country domain of the APs that were held were -A and these were not compatible in Country CO. The case was taken to the TAC and it was necessary to change all the APs to a Country domain -ROW.
Keep in mind that this was a new ...
Hi Marcel
I can't find anything indicating that WLC LDAP cannot be integrated for 802.1 in version 8.5.182.
I can't update, half of the ap's are left out.
Thanks.
Hi Rich,
I had already read the document in the link but the error still persists.
###################
show wireless country channels
Configured Country................ Multiple Countries : AR,CO,USKEY: * = Channel is legal in this country and may ...
Hi Leo,
I had already reviewed this topic and according to the documentation the Country Code CO is compatible with -ROW. Could you confirm? Thanks.
https://www.cisco.com/c/en/us/support/wireless/catalyst-9164i-access-point/model.html#DataShe...
