Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Yesterday evening faced a strange issue with my Nutanix infra. Sharing background of my setup and issue faced. My setup1) I have 5 node Nutanix cluster2) Connected to 2 Cisco 3850 XS3) Nutanix Nodes are directly connected to both 3850 via fibe...
Hi All,
I am facing a strange issues forming adjacency between Cisco 3850 and a fortigate. There are two redundant p2p link. On one link every thing is working fine but one a second link the adjacency is flapping.I am posting here a log which continu...
Hi,
I am designing a network, protocol used OSPF. Attached is the diagram. My query is
1) On site A I have two network behind a l3 switch 172.16.x.x and 172.26.x.x in area 3.3.3.3
2) On Site B I have two network behind a l3 switch 172.30.x.x and 172...
Hi All,
I am planning to create new network. Following are the sites
1) Primary site
2) DR Site
3) Client site A
4) Client site B
5) Client site C.
I am planning to configure this network on OSPF and the sites will have area as given below
Area 0 For...
Hi Deepak.The problem occurred on a off day evening so cpu and memory utilization was at minimal. We had not done any cabling changes so this rules out the option of l2 loop.If you can let me know what logs needs to be check.
Hi, This is really strange but i changed the interface ip of both cisco and fortigate and reconfigured ospf and now things are working fine, really a strange behavior. Thanks for your help
