Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,using Cisco 1841 IOS ver 12.4When im running traceroute from outside the network to my router ipthe trace command show the loop between 2 IP .Any idea?
Hi All,We are using Cisco PIX Version 7.0(1) Device Manager Version 5.0(1)checking pix uptime using the show version commandit's display up 49 days 17 hours, stuck on it and does not updateany advice will be appreciateThanks
Dear Support,using pix ver 7.0asdm ver 5.0my question is: can i add secondary ip address to one from my three local interface,trying to google , not found any manual for itThanks for your help.
using pix version 7.0(1)For one of our client to be remotly connected through the pix unit,is there any way to force user to require pix authentication before the connection is allowed,something like,Telnet in one port to the pixusing user+password a...
Dear Support,running on pix: debug crypto isakmpshow the error below:[IKEv1]: IP = xxx.xxx.xxx.xxx, Header invalid, missing SA payload! (next payload = 4)any suggestion?Thanks for help.
Thanks for your comment,I solved the problem as:I found that if you replace the PeerName with it IP address, than it works again! isakmp key ******** address PeerName netmask 255.255.255.255 to: tunnel-group PeerName type ipsec-l2l tunnel-group PeerN...
