pix 501 ver 7.01 uptime not update

[shaharm6]

Hi All,

We are using Cisco PIX Version 7.0(1)

Device Manager Version 5.0(1)

checking pix uptime using the show version command

it's display up 49 days 17 hours, stuck on it and does not update

any advice will be appreciate

Thanks

[federico_caminos]

Hello !

There is a bug issue related to your problem that was discovered on FWSM.See bug CSCei20682 FWSM uptime stops at 49 days 17 hours.

According to the release notes this problem is solved on version 7.0(4).

Check this document

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_70/70_rn/pix704rn.htm

Hope this helps ! rate if it does ...

[shaharm6]

Thanks for your response.

Is there any document for upgrade the pix version from 7.01 to 7.04 ?

Thanks

[Fernando_Meza · Accepted solution]

hi ..

1.- downlaod the file to a system and taht has TFTP application

2.- As always make a backup copy of your config

copy running-config tftp

3.- from the command line on the PIX type in

copy tftp flash .. and follow the prompts.

4.- when image has been downloaded then use the boot system command to indicate which image should be used when the system reloads.

boot system flash:/

4.- reload the PIX

I hope it helps ... please rate it if it does !!!

[shaharm6]

Thanks Fernando

exactly what i was need.

your are wonderfull

[Fernando_Meza]

cheers ... more than happy to helps if I can