About dketchu

dketchu · 02-23-2007

I have a 3 interface pix 515. The DMZ interface has one old switch attached to it keeping it separate from the rest of my network. If I was to create a vlan for it and attach it to my 6509 instead, so I can use DMZ vlaned ports on other switches thro...

dketchu · 04-10-2006

I am having problems between 2 sites. The connection is intermittent. My main side is a 7513 with a ds3 card. The interface for the site that is the problem (s1/0/0/24:1) is throwing up input, crc and frame errors. The remote site is a 2500 with an e...

dketchu · 08-17-2005

I am trying to install a 1FE2W-V2 card into a 3640. The card is seated properly, as the lights go on and off on power up, but once the router comes up, there are no lights on the card. Everthing else functions on the router, just no interface where I...

dketchu · 02-23-2007

I have gotten 2 great posts to this question so far, thank you much. The problem I am trying to address is related to a new blade server rack. I need to put 2 of 8 servers on 1 enclosure on the DMZ, the rest need to be on my inside network. They are ...

dketchu · 08-25-2005

dgahm: This solution worked. I already rated your other post and I can't find how to change it from 3 to 5. If you post another response, I will give you the full rating.

Member Since	‎05-16-2005 02:24 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

DMZ and Vlans

T1 Problems

Card installation problem

Re: DMZ and Vlans

Re: Card installation problem