Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are having difficulty getting IBM Broadcom NetXtreme Gigabit Ethernet cards (driver ver. 9.56.0) to negotiate 1000/full with 4500 and 6500 Cats. Switch info:6509, s72033-jk9sv-mz.122-18.SXD6, X6748-GE-TX4506, cat4500-ipbasek9-mz.122-25.SG, 4548-GB...
We've integrated WLSM with IDSM-2 and want to monitor wireless traffic terminating on tunnel interfaces. Can't find a way to configure SPAN or VACL on IOS 6500 to capture traffic. Any suggestions?
I want to configure authentication via ACS to ensure that users are using the correct client profile (some are more permissive than others, and I'd like to filter access in ACS). How can I configure ACS to check the group membership of a user when he...
Looking at Nortel's wireless mesh. I wonder if anyone has tried to create an IRB bridge group using both the 11a and 11/b/g interfaces. The goal is to use the 11a interface for backbone connectivity...
Doesn't help on tunnel interfaces; the traffic is encapsulated and you can't get to it until it routes out the interface. So monitoring the VLAN is out.And the gateway for the tunnel interfaces is on another device.
Thanks, solution #1 is exactly what I wanted to do, I wasn't able to find it when I did a search, but I knew I could configure the group restriction somehow in ACS; I've configured other restrictions in ACS for wireless and dialup.
what I'm really looking for is a way to configure the 11a radio as a non-root bridge interface on the 1200 series. Radio 0 would be ap-only, and radio 1 would be non-root. The 11a radio would then bridge to a 1400 or like bridging device. That way yo...
