Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI created site-to-site vpn between asa and pix with no sysopt connecion permit-vpn.I used interface access-list to control what remote site(PIX) can access to main site(ASA).IPSec connection is up and everything is working fine.I have question rela...
HiI am very very confused with few technologies in switching...We configured the switch port as follow: switchport access vlan 30 switchport mode access switchport voice vlan 70 switchport port-security maximum 3 switchport port-security switchport p...
HiI would like to know how many record user tracking database can hold?Any doc mentioned about this?Thanks in advance for your kindness and time.RegardsKyaw
Hi I am curious about how LMS calculate Broadcast Rate? Supposing I set 50% threshold and if I get alert for 1GB link, can I say at that time of moment 500MB amount of packets are broadcasted??That is hell a lot and description given by Cisco manaul...
Hello CommunityI am just wondering is there any proper guideline doc for the issue such as1. log maintenance2. database backupI am asking this because after running server for 4 months, server become quite slow and memory useage is nearly 4GB and DMF...
Hilet me piggy back your thread. I have the same issue but I am not using WLC instead I am using "Autonomous AP". I believe by default it will not send ssid in authentication request. How can I achieve the same result in autonomous ap?Could you pl...
HiThanks for your reply. So just to be precise, ACL is only applied to traffic going through the interface and not traffic terminating at the interface.I already permit traffic for inside network to be able to access to remote inside network.Thanks ...
HiConnection is like this.Main Site > ASA > Outside < PIX From inside interface of both main/remote site allow everything.ACL is applied to outside interface of both. But this ACL doesn't permit ISAKMP, ESP, AH. Tunnel is still established. That's...
You can use IPS to filter those http based chat programs. Too bad that you are still using pix firewall.If you are using ASA, you can buy AIP-SSM module which has IPS/IDS function.HTH.RegardsJoe
