Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I would like to find any documentation how to configure IPSEC VPN, but unsuccessfully.At my office are two uplinks - LAN and Backup, both are connected to ASA5510 (with static IP) and I would like to create ipsec to data center where I have ano...
Hello,I have Cisco WS-C6509 with IOS version 12.2(18)I have several vlan interface on this device.Today I create new vlan intervaceinterface Vlan165 description test5 ip address 10.10.10.1 255.255.255.252endand vlan:VLAN Name ...
Hi all,I have router cisco 2821 wit IOS version 12.4(25d)I also have Cisco AIM-VPN/SSL-2 Encryption Module for this router.I inserted this module in AIM slot 0 but can not see it.I found in kb: http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htvpns...
Hi all,I have Cisco 6509 with 5 ether-channel configured on it.On one ether-channel other side are Dell Powerconnect 5448 switch.All is working fine for some month, but today for some reasons this Po was disabled (already 4 times).On Cisco in logs I ...
Hi,I have two blade system's with ESXi hosts on few servers, all ESXi servers are connected to two cisco switch in blade enclosure.Both ESXi adapters are in active mode.All ports on the blade switch are configured as trunk with several vlan id (same ...
Hello,I woud like to use Site to Site ipsec VPNAt this moment I don't have network diagram, but it looks like this: ---primary (ext 1.1.1.1/29) uplink---Office --- interne...
Hi Vijay,output was: Vlan201 is down, line protocol is down Hardware is EtherSVI, address is 00d0.032a.740a (bia 00d0.032a.740a) Internet address is 12.12.12.1/30after that I executed - "shutdown" and "no shutdown" on vlan interface 201 and all is...
