About paulcahill

paulcahill · 02-21-2020

Switch is a fresh boot, no config. IOS 15.2I've tried 6 or 7 flash drives from 1GB up to 16GB all fat16 file systems with fresh formats. "sh usb device" sees the drive is plugged in. sh usbflash:/usbflash0:/usbflash1: all error out.I have drives in m...

paulcahill · 12-04-2018

I tried to look around briefly and couldn't find the answer. from sho vpn-sessiondb summary: <snip> IPsec : 5000 Configured : 5000 Active : 0 Load : 0% SSL VPN : 25 Configured : 25 Active : 24 Load : 96% We have hit 25 users before - so what happens ...

paulcahill · 11-16-2018

I was copying an pasting some configs between two nexus devices and some how fat-fingered something and the admin user can no longer login to the command line. I can still login as the root user and run an "su admin" and login to the device that way...

paulcahill · 01-21-2008

Thanks for reading my post. I'm new to Cisco admin'ing and need some help. We currently have a T1 that comes into our offices for servers and an internet connection. Its running off a 4000 cisco series as the outside router and then a 4500 series ...

paulcahill · 11-19-2018

So the line was line-wrapping at the 80th column even though my columns were set to much wider than that. the copy and paste did not pick up on that and sent it as a separate line, chopping off the last character in the password hash, breaking the pa...

Member Since	‎01-21-2008 02:49 PM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	5

User Statistics

User Activity

3750 running c3750e-universalk9-mz.152-4.E6.bin - no usbflash0 ?

active concurrent AnyConnect connections - what happens if you go over?

Nexus admin user - can't login to the CLI

Using a 2621 for a NAT router - questions

Re: Nexus admin user - can't login to the CLI