Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When looking at the ASDM Real-Time Log Viewer I can see lots of connection build-ups and teardowns. I can filter them and find the connections that I look for. Everything fine here.I want to see the very same output on my syslog server. But they don'...
Hi, please give your input to a problem I have just created myself.I have a Cisco 5520 WLC and it is running just fine. At this moment there are only three APs, but the company wants to extend the wireless network, including guest access. I was testi...
Can I map the host part in a dynamic NAT translation "one to one"?I am separating two private class C networks with a PIX 525 firewall (v7.0).I would like the last octet to be preserved during the translation without entering 254 static statements.E....
Ok, now it works as it should. The solution was to delete the lineno logging host [interface name] [ip address of syslog server]and then to add it again:logging host [interface name] [ip address of syslog server]And the syslog messages arrived at the...
After spending a lot of time on this phenomenon a colleague finally tells me that he had the same problem at another customer's site. The firepower sends all the syslog messages, but they have a certain format that is dropped by the syslog server. Th...
I have controlled the configuration and checked it against another similar machine from another customer. The configuration is fine. It looks like the problem is a filter on the customer side. I might be able to confirm this tomorrow.
Thank you for the suggestion, but it doesn't change the main problem.I set both ASDM and Syslog Servers to "Debugging" and also enabled "Send debug messages as syslogs", but there are still no connection build-ups or teardowns in the syslog on the sy...
Hi, I know this was asked one year ago, but I stumbled upon it while looking for an answer to a different problem.Anyway, in the provided output you can see this line:Trap logging: disabled"Trap logging" is the code for logging to the syslog server.A...
