Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This could be ugly! I am sure you can make a better job of it than I did 3802i-E 8.x code Power Level Channel12345678 3702i 8.x code Power Level Channel12345678 3702i 7.x code Power Level Channel12345678 3602i ...
Hi Stelker77.The TX power level will vary depending on which channel the AP is using as you already noted. Different levels are allowed on different UNII bands. I have a spreadsheet covering our AP models for my reference. Below is a snip. Yes, it...
Hi. As far as I am aware, they must be on the same L2 domain. Best to connect back-to-back with a cable if possible. Sounds like you may struggle here though...Regards,Andy.
Hi. You can do this manually on the WLC itself. Tryconfig slot 0 disable "AP-Name-Here" config 802.11-abgn role "AP-Name-Here" manual client-serving config 802.11-abgn band ap "AP-Name-Here" 2.4GHz config slot 0 enable "AP-Name-Here" Regards,And...
