Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all, i have anissue due to a possibile misconfig with load-balan in an lacp. my platform is asr9001 with ios-xr 5.3.3. this device is connected to a switch with two bundled lacp ports. the be interface + phy are configured this way: interface Bund...
hi,
i am configuring a bvi in iox-xr (5.3.3 in a crs x). this is the first bvi and first bridge domain configured in the router which replies with the above msg.
any help appreciated!
tnx in advance mirko
hi all, i am studying an integration in the following scenario: 7609_1 ----- 7609_2 | |ASR9K ASR9K \ / ASR920 In the specific:1) in the ASR920 i have configured a l2vpn vpls + bridge-domain (i have...
hi xander, very tnx for your kind reply as usual. so to resume:
1) reboot asr and via console CTRL-C to access ROMMON2) in ROMMON: IOX_CONFIG_FILE=/harddisk:/no-config3) in ROMMON: reset (this will reboot asr)4) the asr will boot with the admin confi...
hi xander, tnx very much for this guide. we have a problem of tacacs reach. here with an asr 9010. for this reason we want to bypass base but not admin (which in our case contains only root pwd). i would fix the exact steps as follows. please comment...
