Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
this is my AAA config;aaa authentication login default group tacacs+ enableaaa authorization exec default group tacacs+ if-authenticated local aaa accounting connection default start-stop group tacacs+aaa session-id commontacacs-server host 201.0.99....
I'm generating pretty large log files of failed attempts in ACS. Is it possible to block the IP address of the attacker automatically from ACS or the router?Thanks
I have several remtoe locations using the integrated services routers, I am currently opening each location monthy to update to this months MOH file. Is there a way to update all of them at the same time, or have the routers look for an updated versi...
Would it be possible to display the IP address of an incoming caller on my caller ID?The calls are from 7931s at remote locations to another 7931 on my desk.
The source address for the device is the same address listed in the tacacs server. The problem I'm having is with the tacacs server IP not the source IP. I'm using a perimiter server (for tacacs) that has both an internal and an external IP. The way ...
12.116.125.178 is my host router, the IP of the acs box is the 201.0.99.97 address. 201.0.99.97 is a network address, not a real world IP. The real world IP of the ACS server is 207.16.131.97I have changed the source interface back to Loopback0, and ...
Thats correct, I'm sorry for the confusion; I started out using Loopback0 as the tacacs source. I changed it to Fastethernet0 to test with. I'll be changing the source back to Loopback0 before I deploy the router.12.116.125.178 is my tacacs server, a...
Here is the output you wanted;Nacogdoches#sh ip int briefInterface IP-Address OK? Method Status ProtocolEthernet0 207.16.131.100 YES NVRAM up up Ethernet1 ...
