Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to bring up a secondary tunnel via a secondary (3G Cellular data) gateway between our company and a 3rd party vendor. Our primary tunnel is down due to provider's network issue and would take time to re-establish. However, I am unable to ...
I am actually very thankful to Rob Huffman. His idea of 4th option to create a voiemail profile in CUCM helped my issue get resolved. been struggling since many days. Thank you so much for this amazing idea. (highest rating for this post)
3GDEVICE#ping 192.168.9.254 source 192.168.9.253Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.9.254, timeout is 2 seconds:Packet sent with a source address of 192.168.9.253.....Success rate is 0 percent (0/5)
No, am not able to reach the other end of the tunnel - 192.168.9.254. interface Tunnel8bandwidth 2048ip address 192.168.9.253 255.255.255.252ip flow ingressip flow egressip tcp adjust-mss 1360tunnel source Cellular0tunnel destination 1.1.1.1crypto m...
Phase 1 does not even kick in when I try to initiate interesting traffic by pinging to vendor LAN's server from our device Tunnel 8 interface. The ping also fails.Please help here. Been stuck with this for a couple of days now.