First off i want to say not a networking guy so sorry ahead of time. Here is the situation i am facing.
Switch a has a fiber line and an Ethernet line running to switch B. We want to have both lines up and running in the case of the fiber line g...
First off i want to apoligize as i am not a big networking guy but somehow have been tasked with this project.
We have a single connections going from each floor of our building to a central server room. Each floor currently has a single fiber ...
Hi Reza,
Thanks for the quick reply. From my understanding and some reading it should still be doable if i can set one as primary and the other as a secondary port. Please correct me if i am wrong as well as i could be talking nonsense
Just a bit more info. The fiber adapter on the switch that is down is showing no activity lights after adding the - channel-group ... on the core switch port that said fiber channel is going into.
Switch A is on floor A .. Core switch is on Floor B . We have a single fiber line and a single ethernet line running to said core switch from Switch A. Core switch ports used Fiber line in tengig 9/1 ethernet in gig 8/34 " for example " on Switc...
So upon issuing these commands i now have lost connectivity to the switch that i am trying to build the redundant connection. Even after re-setting all port config to the original the switch will still not come back up / connect . Any advice my guy
Hi ,
Thanks for the help just to be clear those should be the only commands i need to get the redundant connection working. just ensure that i apply the lines to the correct device / ports etc.
Thanks
