Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,My current Cisco Lab environment details are as follows:Cisco IOS XE Software, Version 17.12.04Cisco IOS Software [Dublin], Catalyst L3 Switch Software (CAT9K_IOSXE)My current Lab structure is as follows:I use a linux system that runs Ansible in a...
EnvironmentSwitch: Cisco Catalyst 9300OS Version: IOS-XE 17.6.5Network topology: Multi-floor, multi-switch environmentObjectiveGood morning. I wanted to think/test a solution that would render computer traffic useless to stop the spread of malware wh...
EnvironmentSwitch: Cisco Catalyst 9300OS Version: IOS-XE 17.6.5Network topology: Multi-floor, multi-switch environmentObjectiveGood morning. I wanted to think/test a solution that would render computer traffic useless to stop the spread of malware wh...
Hi, I'll try to best explain my goal and what I'm trying to achieve. By working through this I came up with several options or solutions on how this can be done. But I don't understand is from a CCIE or high level architecture standpoint what is the ...
It would be great if anyone explained why we get these errors on the Cisco Wireless controller. *dot1xMsgTask: May 31 00:04:14.261: %DOT1X-3-WPA_SEND_STATE_ERR: [PA]1x_kxsm.c:1718 Unable to send EAPOL-key msg - invalid WPA state (0) - client MAC*dot...
I found the below, Thanks. I'll look into it and see how I can leverage this in my project to allow others to quickly create the XML files.Much appreciatedhttps://github.com/vhosakot/yang_to_xml
Hi,I agree that this isn't best practices or something recommended, so I'll provide some background on why I would want to do this.What's happening:1. I store desired configurations in YAML files, in this case the first image ntp.yml2. Jinja2 templat...
Besides monitoring reachability to only the firewall's IP address, would I also be able to monitor the AT&T internal 192 address? If so, this could be exactly what I was looking to do.Thanks
I need to route my 10.191.51.0/24 network through the firewall, it's a requirement. All other networks can route through the 2 ISP links. I am not sure what the best method to use in order to build redundancy for the 10.191.51.0/24 network. I current...
