EnvironmentSwitch: Cisco Catalyst 9300OS Version: IOS-XE 17.6.5Network topology: Multi-floor, multi-switch environmentObjectiveGood morning. I wanted to think/test a solution that would render computer traffic useless to stop the spread of malware wh...
EnvironmentSwitch: Cisco Catalyst 9300OS Version: IOS-XE 17.6.5Network topology: Multi-floor, multi-switch environmentObjectiveGood morning. I wanted to think/test a solution that would render computer traffic useless to stop the spread of malware wh...
Hi, I'll try to best explain my goal and what I'm trying to achieve. By working through this I came up with several options or solutions on how this can be done. But I don't understand is from a CCIE or high level architecture standpoint what is the ...
It would be great if anyone explained why we get these errors on the Cisco Wireless controller. *dot1xMsgTask: May 31 00:04:14.261: %DOT1X-3-WPA_SEND_STATE_ERR: [PA]1x_kxsm.c:1718 Unable to send EAPOL-key msg - invalid WPA state (0) - client MAC*dot...
Besides monitoring reachability to only the firewall's IP address, would I also be able to monitor the AT&T internal 192 address? If so, this could be exactly what I was looking to do.Thanks
I need to route my 10.191.51.0/24 network through the firewall, it's a requirement. All other networks can route through the 2 ISP links. I am not sure what the best method to use in order to build redundancy for the 10.191.51.0/24 network. I current...
Correct they are. Today i'll be doing a search and looking into some logs to check packet flow and possible bugs. It's an old system and the last upgrade we made was due to a DHCP bug that was not documented, so it would suck if this is also caused b...
Thanks for getting back to me so soon. No changes or upgrades were made as we're usually the ones who make. Is there anything specific i should be looking for on the radius servers? No changes were made to that either. Unfortunately there are mixed a...
