Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 WLC (standalone) 9800-40 which runs 17.3.5a. They are part of a mobility-group. I currently use the default ap-join profile with no config regarding CAPWAP/HA on either.
The AP which I'm having issues with is: AIR-CAP1702I-E-K9
When I tr...
Platform: 9800-L-FSoftware: 17.3.2a SSID:WPA(AES/TKIP)+WPA2(AESCCMP128) running simple PSK authentication. No L3 Auth involved. The DHCP forwarding is orchestrated by the 9800 via the SVI. After scouring the configuration and comparing 9800 & 5508 th...
9800-L-F running 17.3.2a5508 running 8.5.140 AP: AIR-AP2802I-E-K9 Hello, To begin with I'll supply a bit of history: Around a month ago we noticed that the certificate of the currently active controller (5508) had expired and as a result when AP:s re...
Hi, EDIT: After adding aaa authorization exec default group radius if-authenticated on the 9500 it started working. But when I remove the processing from the "users" file: DEFAULT NAS-Port-Type == "Virtual"
Cisco-AVPair = "shell:priv-lvl=15" Again I ...
As the picture shows if the "ISP router" goes down or some problem arises with the connection it uses the network will become disconnected. I'm wondering if it's a viable option to add the MX67 to supply a backup internet connection via the cellular ...
Ap filter is a nice method indeed, but its not perfect. If you have a site which have different RF requirements for example you would have to design your naming-standard to include an exact location which complicates a whole bunch of stuff.
I use fil...
There was no difference in the configuration of tags, but I did manage to find out what was happening. It was quite simple really, and not sure how I did not catch on to it sooner.
It was in the name field for primary/secondary controller where the e...
Thanks for the fast reply, I did this and got one error:
VRF: VRF have been configured, this is not a supported feature in 9800 controllers, and it will lead to severe functionality impact
Action: Disable the feature, use the command 'no vrf definiti...
So since the controller had been been partially implemented (we did try the problematic SSID prior to implementing), it took a long time to upgrade the controller, but it now sits on 17.3.3, the upgrade did not fix the issue. The fix which allowed th...
Sorry, PMF is set to "optional", adjusted my original post now. But I will have a look at changing each value on the list to match such as is on the 5508, following this I will adjust RRM etc to match.
