Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I need help with a PIX 501 configuration. Problem is i cannot ping inside network using client VPN.Client VPN version that i am using is 5.0. Attached file is my configuration.Thanks in advance.Regards,Christian
Hi,I really need help with the VPN configuration. I am using 2 pix 501 as demo for VPN connection. below is the the configuration on both site.SITE A :PIX Version 6.3(5)interface ethernet0 100fullinterface ethernet1 100fullnameif ethernet0 outside se...
Hi,I have a problem with the wireless bridge connection using aironet 1300. It work fine before.no changes were done. The problem is that the radio keeps on shutting down.in the web interface radio is enabled but down. i have to manually diable it th...
Hi,I like to ask for help configuring the 2811 router with CME 3.3 I am planning to have an ip phone on a remote site connected to this router over VPN. IP phones on the remote site have different subnet from the ip phone on the other site. Need h...
I'm trying to set up VPN connection using1841 router and tz-190 sonicwall firewall. VPN is not working and i'm getting "%CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE packet from [IP_address] was not encrypted and it should've been"i have found this article ww...
Thanks so much for your time. I have solve the problem. I added several commands.name 10.1.2.0 clientaccess-list 101 permit ip 10.1.1.0 255.255.255.0 192.168.11.0 255.255.255.0access-list NoNAT permit ip 10.1.1.0 255.255.255.0 192.168.11.0 255.255.25...
here's my router configuration:no ip domain lookupip name-server 10.48.0.100!voice-card 0 no dspfarm!!!voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip suppleme...
