About pabloayalas

pabloayalas · 08-21-2024

Hello, I have DNA-C version 2.3.5.5-70026. I'm trying to enable the AI-Enhanced RRM feature under Settings > External Services > Cisco AI Analytics, and I'm getting the following error - Unknown Error: An unexpected condition was encountered. Please ...

pabloayalas · 07-25-2024

Hello,I'm checking if anyone had this experience with the new controllers connected to the 3800 access points. We have multiple 9800 WLCs that we migrated from the old AireOS 5520's. All new WLCs 9800 are running version 17.12.2. We have sites:9800 w...

pabloayalas · 06-02-2024

Hello,I'm trying to find a way to configure the anchor WLC in the 9800 that can also broadcast the SSID and allow to connect clients. We had Aireos without any problem, but now that we are migrating, we just realized that we can't anchor and keep ser...

pabloayalas · 01-31-2024

Hello,I'm facing an issue with our 9800 where we can't SSH into any of our access points; even though we have it configured in the AP Join profile, we still can't SSH. This is the output from the policy profile:WLC-1#show ap profile all-profilesAP Pr...

pabloayalas · 03-30-2022

Hello, I'm working on an integration via MnT API calls where I can provide to end-users the status of their endpoints (if they are getting blocked or allowed by ISE) as well as some location (port and switch). I have a distributed deployment running ...

pabloayalas · 08-21-2024

Thanks for the trick. I didn't think about that. Enable Endpoint Smart Grouping is a feature that is only supported when you have Switches or Hubs managed by Cisco DNA Center, which is not our case.Now, AI RRM is enabled:Thanks a lot

pabloayalas · 07-30-2024

@marce1000, thanks for your recommendation. This has been identified as a BUG CSCwj76892 (2802 Low downlink speed noticed due to WLC not configuring aggregation schedule parameter correctly.). This impacts when you are migrating from AireOS to IOS-XE...

pabloayalas · 07-30-2024

It's been less than a month. We are currently installing these new WLCs. Just for awareness, this is a BUG issue. The TAC has identified the ID (CSCwj76892) - 2802 Low downlink speed noticed due to WLC not configuring aggregation schedule parameter c...

pabloayalas · 07-26-2024

Yes, it is. We have two 9800-40 units running version 17.12.2. All configurations and management are handled through DNA-C. We attempted to switch between the WLCs to resolve the issue, but it did not have any effect. However, when we rebooted the ...

pabloayalas · 07-25-2024

We have tried everything, but nothing seems to work. We've rebooted the access points and switchover the WLCs and still nothing. The only thing that has worked so far is rebooting both WLCs. Should we consider turning on debugging? I hate to say it, ...

Member Since	‎08-07-2018 12:29 PM
Date Last Visited	‎09-05-2024 08:19 PM
Posts	23
Total Helpful Votes Received	3

User Statistics

User Activity

Unable to enable "Enable AI-Enhanced RRM"

Slowness with 3802 connected to 9800

Catalyst 9800 Anchor Wireless setup

Unable to SSH to AP joined to 9800

MnT API call takes too long

Re: Unable to enable "Enable AI-Enhanced RRM"

Re: Slowness with 3802 connected to 9800

Re: Slowness with 3802 connected to 9800

Re: Slowness with 3802 connected to 9800

Re: Slowness with 3802 connected to 9800