Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys,
I am receiving the following error on inserting SFP into my ASR 9001 router :
pfm_node_lc[294]: %PLATFORM-SFP-2-LOW_RX_POWER_ALARM : Clear|envmon_lc[147540]|0x1029002|Port_0/02
I am currently running IOS XR Software, Version 5.3.3[Defaul...
Good day allI work for a service provider and I have set my bgp maximum prefix for routes from my customers to 500 but a particular customer wants to extend this. I could permit this but managent has asked me to find out how othere service provider...
AP's fail to register in a WLC 2106 ver 6.0.196.0I have the following configurations yet the AP give the errors below*Dec 14 20:30:14.494: c8:bc:75:c9:27:54 Received a Discover Request from e8:4f:75:29:77:24 via IP broadcast address but the source I...
Dear all,I have successfully gotten used to using the different attributes for external user authentication and I have also done internal user authentication previously on a different machine. Now I want to combine both authentiacation profiles so th...
Good day all,I have configured the acs box properly with all the command sets, shell profiles and authorization rules. Local authorization works well but I am now trying to use the AD to authenticate. I have joined the domain.When I try to log into t...
The configuration and the application is not the issue here. What I am concerned about is the case where you have a policy of only X number of prefixes from the client but this special client wants to do (X + Y) prefixes. Would you place an additiona...
i found the solution to this. what I did is that I when to the user and group menu - to - identity store sequence, created a new called internal and external and selected password base, then selected both internal users and AD users.then to default d...
Thank you so much for your reply. I have tried this but it does not work.This is what I did :I followed you step and selected both AD1:External Groups and AD1:member when I customized the authorization menu. The issue is that My organisation did not ...
can you ping your acs from the core device when the IP are still as they were initially? If you can't then?I suppose your acs is connected to you access switch:my configs would be?ACS Express - 5.0IP address (172.16.4.10) connected to fa0/1 on acce...
