Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi ,From the perspective of a high level, devices within the same Configuration Group do need to have the same features configured, yes. It is possible to have different low-level settings of course as that is achieved through device variables.For ex...
Hi @eduard-r20,The problem is NAT on the DC-HUB02 router and the behaviour of TLOC colors. The recommended and best practice fix is to disable NAT on interface GigabitEthernet1 of the DC-HUB02 C8Kv (and the other steps I will detail at the bottom), t...
Hi @seanrb2020,Hope it's all going well.You can change the OMP configuration and it can be done in two ways:Changing the behaviour globally, e.g. disable all redistribution of static routes across all Service VPNsChanging the behaviour per Service VP...
Hi @Sam Caprio,The vSmarts (SD-WAN (Controllers)) and vBonds (SD-WAN (Validator(s)) do have different commands. The commands are:vBondshow orchestrator connectionsvSmartshow control connectionsThe vManage (SD-WAN Manager) is also the same as the vSma...
Hi @iores,In my experience, the Simulate Flows tool on the GUI, or the 'show sdwan policy service-path' command on the CLI, which are each the equivalents of each other, do commonly give incorrect output, at least on multiple software versions. when ...