Hello all,
Is it possible to configure WebVPN (AnyConnect) on Router c1111-8P with IOS XE Software, Version 16.08.01.
If not, what i can configure for Remote Access on mobile device (Android, iOS etc) ?
Hi All!
Recently i bought Cisco c1111-8P. The data sheet says:
But in console:
Router#show power inline gigabitEthernet 0/1/0 detail
Interface Gi0/1/0: inline power not supported
Router#show power inline gigabitEthernet 0/1/1 detail
Interface Gi0/...
Unfortunately, I can`t download newer IOS without SmartNet.
May be, anyone help me download from https://software.cisco.com/download/home/286315006/type/282046477/release/Fuji-16.9.2 file c1100-universalk9_ias.16.09.02.SPA.bin
Chassis type: C1111-8P
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 C1111-8P ok 17:16:32
0/0 C1111-2...
Unfortunately, a 125w power brick don`t help me.
And in console^
Router#sh power inline gi 0/1/0 detail
Interface Gi0/1/0: inline power not supported
Router#sh power inline gi 0/1/1 detail
Interface Gi0/1/1: inline power not supported
Router#sh ...
I bought this device for home use. I didn`t buy smartnet. But Cisco placed ISR1K into enterprise segment, and don`t responed any issues without SmartNet :-(((