Please find the link below for the same.https://software.cisco.com/download/home/286281356/type/283850974/release/3.0%25284d%2529?i=!pp Also can you check if the cables going from the controller to the HDD are connected properly?
Can you try to upgrade the firmware of the server to the latest one and check if the HDD are getting visible in the CIMC or not.So you have swapped the Raid controller as well correct with another raid controller?
You cannot directly upgrade from 2.2 to 3.2 firmware version. Its is two step process firstly you need to upgrade to version 2.2.8 or 3.1.X and then you need to upgrade again to 3.2. You can get more details in the release notes below.
https://www....
Can you let me know which ESXi hypervisor version are you looking for.
Please check the below link to download the Cisco customized image of ESXi 6.0
https://my.vmware.com/group/vmware/details?productId=491&downloadGroup=OEM-ESXI60U3-CISCO
htt...
Unfortunately manual command is not there to connect it as per my knowledge... You can check if the other slots of the chassis are working or not.
If the IOM ports are not coming up by doing all sorts of troubleshooting then probably the RMA would ...