Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm hoping someone can help me with my multicast probelm. Multicast works fine in one VLAN but I can't get it to span multiple VLANS, heres a low down of my setup and config.Please see the quick diagram for a reference, this how its configure...
I have aprox. 20 phones on a UC540 and only two of them are giving me a fit. Here is what's going on for example.Ext. 300. When I call this extension it will be BUSY 6 out of 10 times when I call it. The user is not on the phone, nothing...
Would anyone be able to explain why my backups are failing and unable to complete?The loopback interface is up but it has an IP assigned to it from my phone VLAN (10.x.x.x). Does the loopback interface need to have an IP that is on the local data ne...
We have two phone systems side by side, one is a Cisco UC540 and the other is a Shortel. (Im not worried about configuring the shortel side of things, that is a whole different company).From the Cisco side I know I can use this command in the CLI and...
Both VLANS have "ip igmp high-priority-forward" enabled.According to the docs I read when you enable ip igmp on the VLAN that basically enables the ip igmp snooping command we are all used too. I enabled globallly this command on the switch as well:i...
This does make sense and I acutally had an extra ephone-dn with the 313 number assiged to it. However, that ephone-dn wasnt assigned to any ephone's so I would think it wouldnt matter.I did delete the duplicate ephone-dn and will test the results in...
I just thought of something,this is being initiated from a machine not physically connected to the UC540.Im giong to retry this in a few days on a machine that is physically connected to a switchport on the UC540 or at the very least plugged into the...
Hmmmm,It appears as though the MSM wants to connect over a WAN connection. (My other system is not on the WAN but off of another switch that connectes to the expansion port on the UC540)
