Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
OK, so I decided to TRY and build my own voice lab. By the way, I have just the smallest experience with voip. At my new job, I have to support a UC520 and to help get me familiar with the voip world, I decided to buy a 2620xm off ebay for like $50...
Ok, I have a unique situation. I have a server that I lease that is hosted at a datacenter. Our company is going to lease a half rack and put our own equipment in it as well as a disaster recovery site. The problem is that the one server I mention...
Hello everyone! I have just installed a new 3560x on our network to replace an old C3560. We have a UC520 here as well for our IP phone system (which I am totally new to). Ok, I have setup the new switch with the same config as the old switch with...
Hello, I have a brand new 4510e with dual sup7 engines. I am having an issue with a vlan routing correctly. I believe that I may have missed a command, but not for sure. OK, so I have the native VLAN 1 setup with 10.1.24.0/21 address on it. I als...
I have two questions reguarding the 3750x series switches.1. Does the 3750x come with the stacking cable(s) or is that a seperate purchase?2. Can you stack a POE and a non-POE version together? (same IP base of course)Thanks,Nathan
Ok, I figured it out. I thought I had made the port on the 3560x that goes to the UC520 a trunk port, but evidently I was wrong. After making it a trunk port, it started working correctly. Thanks Leonard for your help!
Thanks Jon and Naidu! Does it matter which layer you config first? Because I origionally setup the vlan interface first then the actual vlan and that didn't seem to work, but when I setup the vlan first and then the vlan interface it worked as expec...
