About Mr. Bash

Mr. Bash · 06-04-2024

I'm looking for a way to perhaps use an API call to export the database that you can see what you log onto the ISE Guest sponsor portal [after clicking "Manage Accounts"] [Image attached].My original solution was to get them imported in some way via...

Mr. Bash · 03-06-2024

Hi all!I am looking for some guidance on the best way to offload local logs from ISE to an SFTP location. For instance, I can see the localstore log via the command below.ISE_PAN/admin# show logging application | inc localStore5177204 Mar 06 2024 ...

Mr. Bash · 11-23-2021

I have an odd issue at a site where the end user gets disconnected randomly. I have the debug from the 9800 WLC for this client below at the moment the disconnect happens. Things seem to go sideways as you can see below, but I can't seem to under...

Mr. Bash · 07-06-2021

Greetings! I am on a quest to be able to account [bandwidth] for usage of our Guest wireless service so that we can determine which WLC is using what % of the traffic on our proxy tunnel [internet service]. To state it another way, we have tunnels ...

Mr. Bash · 02-10-2021

I'll try to explain our current setup briefly. Our WLAN environment leverages Cisco WLC's, AP's and Cisco ISE 2.6. Our BYOD users are local users in our ISE db, when they connect to our BYOD WLAN they merely have to enter in their PEAP [not PEAP-TL...

Mr. Bash · 06-07-2024

Thank you so much for all this info!!

Mr. Bash · 08-09-2007

But isn't overlap ok so long as you are using channels 1,6 and 11? I thought if you only have 3 ap's overlap isn't an issue so long as you used 1 6 and 11.

Mr. Bash · 08-09-2007

We are using 1231G's so b/g. The size of the area is about 50K sq feet. Many users however are clustered in one area. I guess my real question is, if I cluster 3 1231G AP's in one area, using channels 1,6 and 11; how do I get the load of client as...

Mr. Bash · 04-17-2007

This should help some:http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_command_reference_chapter09186a0080341fa0.html#LTR_S

Mr. Bash · 04-11-2007

I manage AP's in a warehouse environment. 11K sq feet is fairly small you should only need two AP's, one really but I never deploy just one AP.You can connect a 3dbi antenna [omni] and you should be in business. The power should be at 50mw I would ...

Member Since	‎05-24-2005 11:16 AM
Date Last Visited	‎06-24-2024 10:46 PM
Posts	38
Total Helpful Votes Received	14

User Statistics

User Activity

Searching for method to download sponsor database - ISE 3.1

How to work with ISE log files

Client getting disconnected [admin reset]

Accounting for Guest WLAN usage on 5508 Anchor

Help with BYOD PEAP and Android certificate requirements

Re: Searching for method to download sponsor database - ISE 3.1

Re: WLAN Design question

Re: WLAN Design question

Re: Show Dot11 Commands

Re: Wireless Deployment