Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've been having difficulties transferring the .tar.gz to my ISE PAN/PSN and was wondering if anyone knew if I could complete an upgrade via the .iso? 1.4 > 2.1
Having problem pinging from Host A on ESX1 to Host B on ESX2. Each host are assigned the same port-profile. If I put 2 host's on the same ESX machine using the same port-profile, they are able to ping each other. Any ideas?n1kv-vsm# sh port-profil...
I have a primary and secondary ACS server. The primary server is also the log collector (not sure if it's relevant). The problem I'm having is when my ASA is using the secondary ACS as it's RADIUS authenticator, the RADIUS accounting log reports do...
I currently have 2 offices with 16 Pt-Pt T1's. These are split in to 2 Multilinks, each with 8 T1's in each. We split this so that replication traffic is on 1 multilink and general data is on another. I am seeing that we are not fully utilizing ou...
I have a 3825 w/ (1) VWIC-2MFT-T1 installed already. I need to install a 2nd VWIC and am questioning if I am able to insert the card while the router is in production or if a shutdown is required. Any advice?Thanks,Shannon
Understand this particular issue was code related but we do have a power issue which is why I'm responding on this thread.
We're looking at inline POE (802.3at) injector rather than individual 'injector blocks' for each AP. I've seen some posts sta...
When in doubt, reboot. Logged a TAC and we went through all the settings, patch levels, firewall versions. Moment of last resort was the suggestion was to restart the services on the Primary ACS. Services came back up and voila, everything worked....
