Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,2811 Voice router with CME and SIP phone is installed and working.2 BRI interfaces connects to PSTN (they are no SIP trunk).When outgoing calls made from SIP Ipphones to an external IVR system, DTMF signals are not sent in order to navigate ...
Hello,Trying to allow NFS access from a DMZ host to an Inside NFS Server, I got "% Invalid Hostname" Message when configuring Access Rule.That append when I add "eq nfs" to ACL.It's regarding HA 515E PIX firewalls, with context configuration and PIX ...
Hello,When a second client VPN connexion is done from the same NATed network than a first one, the first client VPN connexion is terminated with the Reason code 433. Does anybody have an idea how to configure the ASA 5510 version 8.0(3) to allow mult...
We have a WS-X6624-FXS card installed in Catalyst 6506 with CCM 3.3.2spC and a vg200 IOS gateway.The FXS ports supply ~26v instead of 48V expected.The problem is that the connected faxes does not handel a call because they need min. 33V (according FA...
Hello Huseyin,Thank for the reply.Of course I checked that the command is correct.I also introduce the access rule by using ASDM with the same result.Hereafter the outputs:PROD(config)# access-list DMZ-PUBLIC_access_in_V1 line 19 extended permit tcp ...
If you are setting up a bridge as a non-root, the radio interface will not come up unless it is associated to the root even if it is enabled! So you be seeing an association problem between the two BR?
If you are setting up a bridge as a non-root, the radio interface will not come up unless it is associated to the root, so you be seeing an association problem between the two BR?
