Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I would like to know if someone have implement over CISCO7613 (with c7600s72033-advipservicesk9-mz.150-1.S6) the design Inter-AS option C offering connectivity on ASBR via xconnect?.Like this: CPE1 <-> [ASBR-1] - { CORE [ASBR-XX] < OSPF/LDP...
I would like know if there is a specific formula for declare the max number of CRC about a specific interface. Thanks in advance CiaoChristian Biasibetti
I have this situation:Router-A |HDSL 2Mb|Frame-Relay CloudPVC/X withCir=64kEir=128k|HDSL 2Mb|Router-B I would like always send traffic at the peak of the PVC/X, if the network have not congestion.I have configured the following map-class:! map-class ...
Hi,I would like know if is possible use a PA-POS-OC3SMI (155 Mbps) for collect the traffic from two E3 (34 Mbps). Of course, if is possible, I would like know how can I must configure the PA-POS-0CE3SMI for routing over two links at 34Mbps. I show an...
You can use an external Flash of 16MB ( PCMCIA) or you can use a pair of sim over motherboard.See this link for the hardware istructions :http://www.cisco.com/en/US/products/hw/routers/ps274/prod_module_install_config_guide09186a008007ce2d.html Alert...
If is possible for your network ... I suggest you to use Stub & Totaly Stub Area, so you can start with an automatic filter for link-state type 3-4-5 yet.ByeChristian BiasibettiIvrea - Italy.
