Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am a bit baffled as to why I am not allowed to have this NAT exemption rule in place while the EZVPN Remote is enabled.Here is my topology:I created a DHCP pool reservation based off of the MAC address of my laptop; this receives the reservation ad...
I believe I already know what the issue is but wanted to confirm. I recently changed the configuration of the routers so that all incoming SSH connections can only be done via the specified port:ip ssh port xxxx rotary 10created an ACL and everything...
I recently configured a Cisco 2811 as an Easy VPN Server. We presently have a slew of Cisco 871w, 881w, and Cisco VPN clients connecting to it. Everything works fine till I remove EIGRP, once EIGRP is removed all traffic through the VPN Server stop...
ASA5505# copy running-config tftpASA5505# copy running-config tftp ? !--this will allow you to save the running-config to a tftp server. I recommend tftpd32: http://tftpd32.jounin.net/ ASA5505# copy tftp ? disk0: Copy to disk0: file sy...
I personally only look at gigabit managed switches. Additionally, I don't look at Linksys rebranded Cisco managed switches. I would choose this as the cheapest:http://www.newegg.com/Product/Product.aspx?Item=N82E16833120164CISCO Catalyst WS-C2960-2...
I believe this is what you are looking for:interface FastEthernet0/1ip address 58.27.x.x 255.255.255.224ip nat outsideduplex autospeed autointerface FastEthernet0/0description Connected to Internalip address 10.3.18.1 255.255.255.0ip nat insideip vir...
If the url"youtube.com*" is place in a low (parent) policy, but not within the low family policy, how is that traffic handled in relation to CBWFQ defined in the low family policy?"If a default class is configured with the bandwidth policy-map class ...
With the FQDN you still recieve the DNS error and the Cisco admin page is displayed? When you do a nslookup what IP address does it resolve to and is this the correct IP address of your wsus server?Is that server being NAT'ed outside? Is this a sep...
