Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a new Internet Connection (my 6513 will be a Internet Router) using 10GigE connection. The port is up and linking at 10Gig. I have my ip and the other 'side's' ip address. My question is what are the advantages disadvantages to the followin...
So I'm a little confused and cannot find any kind of answer. Which seems odd as I would think this would be a majorstep in the ipv6 implementation.So the question/scenario.... A dual stacked server using one ethernet cable into a 6513. Currently t...
We have about 15 L3 interfaces on the FWSM, all with security level 50(except for the Outside interface which is 0) We have a new vlan that we want tosegragate from the other vlan's on the fwsm. We currently have the 'enable trafficbetween interfac...
I have redundant sup 720 cards and both are displaying red led's for pwr mgmt. I can find no other error or logging indicating an issue. However, we recently did a ios upgrade and the secondary sup card crash dumped. It also managed to take out th...
I am curios to know if using the remark command has any adverse performance effects. Particulary with a large ACL ( 2000 lines). Wouldthe ios also have to process 2000 remarks or does it not include that when loading into cpu/ram for processing (no...
I find it odd the lack of information regarding the access ports. With Dual Stack being the primary implemenation method for ipv6, you would think there would be more information regarding the access port. Has anyone implemented this on a large sca...
Nope... These are not L3 interfaces.... (Interface200). These are 200 servers that need to be connected to 200 access ports. Dual stacked, one ipv4 add and one ipv6 add. One cable connected to one switchport.
Thanks for the info. And that makes sense for a L3 interface but what I'm talking about is an L2 interface. for example:swtichport access vlan 200so 200 is used for exsting ipv4 range. I now have 4 new ipv6 ranges. I'm not sure I understand how I ...
Environment status looks fine.These are 4000W 250v pw's. Pretty beefy.Cisco couldnt find anything. They are swapping out the chassis and sup engines.Thanks!
Thanks for the info.I was thinking the same, although i did not think those two rev's were that far apart. It would be nice to have a matrix with ios and release dates.The only reason this is an issue, is that somehow on our slavebootflash, it only ...
