Hi, Instead of tag-switching use mpls ip (LDP). enable mpls ip globally and apply wherever you are using tag switching. It will work.If you want reference of ready lab have a look on this page. Refer the config for VRF VPN_B.http://startnetworks.bl...
Hi, ip route 192.168.1.16 255.255.255.0 10.1.1.2---> this statement is wrong... The network is not in correct format... if you configure this command in router it will show you error - Inconsistent address and mask. it should be --- ip route 192...
Hi, To run QOS for phones. you can make a class map for phone(VOIP) then make a policy map QOS match the class VOIP in that strict priority of 30%. then for class default - remaining. Apply that class map to Virtual template.For example : http://...
Hi, Acl is used for filtering the traffic based on configured parameters. But it is a single statement. If it match then it will permitted or denied. But you get more flexibility in Route-maps. You can use the ACL as a match statement in Route map ...
Hi, As per my understanding... This is a log output for a spurious access. Plz check the document. It is related to software.http://cisco.biz/en/US/products/sw/iosswrel/ps1828/products_tech_note09186a00800a65d1.shtmlUttamhttp://www.startnetworks....