About Jason Sinclair

Jason Sinclair · 09-10-2015

Anytime. Let me know if you need anything else.

Jason Sinclair · 09-10-2015

Here is our standard switch configuration (same on both switches). The standard switch has both adap...

Jason Sinclair · 09-10-2015

For a standard switch, no. I have mine setup with the defaults of "Route based on originating virtua...

Jason Sinclair · 09-10-2015

I have it running with no portchannels or VPC. vSphere takes care of the redundancy and failover. I ...

Jason Sinclair · 05-13-2015

That worked! I did some testing and watched through the ESXi console as I enabled and disabled links...

Jason Sinclair · 05-13-2015

I didn't try that..I will give it a shot. Do I need to be concerned with port flapping? I'll make th...

Jason Sinclair · 05-13-2015

Yes. Here's the output from SW02: vPC domain id : 10 Peer status : peer adjacency formed ok vPC keep...

Jason Sinclair · 05-13-2015

We just upgraded our core switch to a Nexus 9396, which is connected to dual UCS 6248 FI's and also ...

Jason Sinclair · 08-30-2013

Thanks for testing this out.I am using 2.1(2a) across mine. I was able to get the port to re-join th...

Jason Sinclair · 08-29-2013

Thanks, but that article refers to Ethernet Port Channels. I am talking about Fabric Port Channels b...

Jason Sinclair · 08-28-2013

Thanks for the help! Let me know what you find out.

Jason Sinclair · 08-28-2013

I recently changed my global chassis connectivity policy to 1 link with port channel configuration. ...

Jason Sinclair · 08-22-2013

I'm not sure if this is better suited for the UCS forum so if I'm in the wrong, I apologize in advan...

Jason Sinclair · 07-22-2011

We just setup single Inbox with Unity Connections 8.5 and Exchange 2007 SP1. Our Blackberry Enterpri...

Anytime. Let me know if you