08-28-2013 07:08 PM - edited 03-01-2019 11:13 AM
I recently changed my global chassis connectivity policy to 1 link with port channel configuration. I originally had 4 links connected to each IOM, but wanted to go down to 2. I re-acknowledged the chassis after making the change and disabling the other 2 connections, which resulted in a single port channel on each 6248 with 2 server ports. Everything was working great, and no more "unsupported connectivity error" in UCS Manager.
Now, I was going to configure one of the ports as an ethernet uplink and had one of my "tired moments" and accidently configured it as a server port. This automatically added it to the port channel on FI A (the twinax was still connected to the chassis because I was working remotely). Everything came back fine, but when I went to unconfigure the port it's still showing as a fabric port in the IOM module and the unsupport connectivity error is back. No matter how I enable/disable the port, it still shows an error. Is there anyway to get this back to normal operations without re-ack'ing the chassis? I don't want to schedule downtime for 300 VDI users again and I'm going on vacation next week so I hope I can fix this in a non-disruptive way. I thought having a port channel with 1 link setup in the global connectivity policy was going to allow adding and removing links without having to re-ack the chassis? Maybe I'm wrong? Adding worked, but removing definitely didn't...unless I'm missing something.. :-)
Thanks for any help!
Uner the Internet LAN it shows only 2 interfaces in the port channel:
Under the IO module 1, it shows 3 fabric ports, even though Port 1/3 is disabled and "unconfigured":
These are the errors that still are showing up:
08-28-2013 07:56 PM
Jason,
I am afraid I have to say you will have to reack the chassis to rfe-evaluate the connection and functional links, however let me try to reproduce the issue and I will see if I can figure out a workaround... NOT sure if a change in the cluster lead might help, but let me try in the lab and I will tell you.
-Kenny
08-28-2013 07:59 PM
Thanks for the help! Let me know what you find out.
08-28-2013 09:32 PM
Jason,
Following link might be helpful.
Regards,
Shahzad
08-29-2013 05:29 AM
Thanks, but that article refers to Ethernet Port Channels. I am talking about Fabric Port Channels between the FI and the Chassis.
08-30-2013 05:52 AM
Hi Jason,
Here is what I did:
1-Unplugged one cable in the IOM in my lab while having the CDP changed to 1-link with "Port Channel"
2-I allowed some time to make sure the IOM-Fabric connections was recognized as lost
3-I plugged in the cable again and the same was recognized automatically and the error about the "Un-supported Connectivity" got cleared by itself.
I use 2.0(3c) accross the whole domain, what do you use?
-Kenny
08-30-2013 06:36 AM
Thanks for testing this out.
I am using 2.1(2a) across mine. I was able to get the port to re-join the port channel, but you're saying I will have to re-ack the chassis if I want it permanately removed?
08-30-2013 07:43 AM
Jason,
In
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#d44081e6606a1635 you can see you should be able to add remove ports with no issues.
If that does not work, I recommend the reack and please a TAC case (faster to get the info) or feedback to that document.
-Kenny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide