Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I configured a UC560 with the package 8.1.0 and set up the B-ACD in drop-throughEverything works fine - only one problem ...The UC is located in Germany and I use the german localization packageand all call progress tones are german.But if some...
Hello community,i´ve set up a trunk between two UC500 with H.323.Everything works fine, extensions are translated with correct node-numbers and so on,calls are possible and missed calls can be answered correctly.But if anyone calls over the trunk an ...
Hi, I have a UC540 with package 8.1.0 and several different IP-Phones.(509, 525, 6941, 6961, 7962, 7965, 7975) UC, CUE and phones are configured for germany and it works,only the 6941 an 6961 are still in english ... Firmware of the 69xx: cmterm-69xx...
Hi, I use a UC520 and several 7965G.Is it possible to activate CallForwardBusy with the keypador is it only possible with CLI or CCA?Kind regardsDetNit
Hello, I have a uc520 with 15 users and one standalone fax. I´ve generated several extensions for fax which are all forwarded to the standalone fax 901.That works ...Now I want to configure the following User Chris with the extension 100 and his own ...
Hi Rainhard,this sounds like the following problem:The integrated service engine is admin down.Try "sh ip int brief" and if it is really admin down then straight forward: "conf t", "int in 0/0" and "no shut"Kind regards, Detlef
Hi Rainhard,the same problem took several hours at my side until I found your thread and the solution.Grrrrrrrrrr ... unfortunately somewhere in a failed update there was a shutdownof the ISE 0/0 and the first tries in the home-network weren´t succes...
Hi,no further help needed ...Last day I replaced the commands in the telephony-serviceuser-locale U4 load CME-locale-de_DE-German-8.1.2.1.tarnetwork-locale U4with the following statementsuser-locale DE load CME-locale-de_DE-German-8.1.2.1.tarnetwork-...
Hi,no further help needed ...Last day I replaced the commands in the telephony-serviceuser-locale U4 load CME-locale-de_DE-German-8.1.2.1.tarnetwork-locale U4 with the following statements user-locale DE load CME-locale-de_DE-German-8.1.2.1.tarnetwor...
Hi,according to the way that I received an info on node 301that the original call was redirected to extension 55 (CUE)on node 501, I create the following config on node 301:!!dial-peer voice 55 voip translation-profile outgoing redirect_to_CUE_501 de...
