Hi,For the past few days I've been attempting to configure a data T1 on a Cisco 1760, but I'm stuck at:Serial0/0 <our ip address> YES NVRAM up downTo provide a bit of background. This router used to be configur...
Hi we have a Cisco CallManager with Full Unity version 3.3 and we would like to integrate ourour call manager with a Switchvox solution via VPN in a remote site.Aparently CallManager 3.3 doesn't support the necesary SIP trunking in order to be able t...
Hi I have a VOIP at the office and lately I?ve been getting complaints that not all call get through, and it?s something that happens very sporadicly. So I?m thinking maybe I don have all the required ports open in our firewall.I have the 16384-32767...
Hi Blakley,After talking to ISP they verified the circuit on their end, and they found a number that appeared to have been "misstyped" as they said.They probably gave us the wrong DLCI. Which is discussed in the document that you gave me.We are now u...
Here you go:!! Last configuration change at 19:34:03 UTC Sat Aug 4 2012!version 12.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!logging queue-limit 100!tdm clock T1 1/0 both...
The show frame-relay lmi returned the following:LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO Invalid Unnumbered info 0 Invalid Prot Disc 0 Invalid dummy Call Ref 0 Invalid Msg Type 0 Invalid St...
Hi, Blakley, thank you for your help again.I tried exactly what you said with one exception; which is that the IOS didn't like me specifiying the timeslots in the sub interface, so I moved it over to the interface. Configuration:!interface Serial0/0 ...
