Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a lab set up in my garage, like this:A router(B) connected to another router (A), this router (A) connected to two core switches, both connected to a server switch. At the end, a raspberry pi connected to F1/0/3 on ServerA. All configs attach...
I have a router that I am telnetting into via raspberry pi. Works perfectly fine on switches, but on the two 1921 routers, after hitting enter more than twice, or getting a log message, the connection gets dropped. "2001" is an alias for "telnet 127...
I'm having some trouble trying to figure out why I'm getting the following errors in my logs. This morning, for the first time in over a year, my switch stopped communicating with my core switch, so I checked the log.
Feb 27 16:25:15.364 UTC: %SP...
My mind is boggled. I am having trouble still. I went, line by line, and even copied and pasted your configuration, I have the same config, and RouterB still cannot ping 192.168.10.10, but RouterA can. I can no longer ping 10.10.10.2 (G0/0 on Rout...
Thank you for taking the time, I really appreciate it!I went through and made sure all ports on switches were set to switch access vlan 10, and sw mode access. I also removed vlan 10 on RouterB. This didn't work, the issue remains.Further, I comple...
Thank you, attached is a visio layout of how I set up my lab. I've been working out how to set up full redundancy, both between the two cores themselves, along with the connection to RouterA. I also am working to set up etherchannel between the two...
