About NPO-IT

NPO-IT · 04-15-2019

Hi,I've got two 2960X switches connected via straight cable. SW1 sits between SW2 and my router (and the rest of my network). I can ping and telnet into SW1 from any machine on my network with no issues. I cannot do the same with SW2. I can't ping...

NPO-IT · 03-15-2019

I've got a Catalyst 2960X, trying to connect to a Fortigate 100D. I've created VLAN64 on the FG100 as well as on the 2960. I configured a trunk port and allowed just that VLAN to pass through. I've also configured my access ports to be a member of...

NPO-IT · 04-16-2019

Here's the configuration for SW1:Current configuration : 7569 bytes ! ! Last configuration change at 05:46:51 UTC Mon Apr 15 2019 ! NVRAM config last updated at 05:04:25 UTC Sun Apr 14 2019 ! version 15.2 no service pad service timestamps debug datet...

NPO-IT · 04-16-2019

Thanks Paul. Is SW1 considered a core switch because SW2 is downstream of it (in relation to the router)? Right now, IP routing isn’t enabled on either switch. If I enable it on SW1, should the gateway address I set on SW2 be the address of the route...

NPO-IT · 03-28-2019

It was changing the VLAN from 1 to 64, but keeping the addressing the same, that did it. I made the change, and after a few minutes (I'm not sure why it took that long to effect...there are no hops between this switch and the router), I was able to s...

NPO-IT · 03-16-2019

One more question re configuring VLAN64 explicitly...why do i do this instead of VLAN1? is it because i want to use it as my native VLAN?

NPO-IT · 03-16-2019

This is correct, Deepak. That's what I was trying to articulate to Rick. Thank you for the follow up...and for replying on a weekend!

Member Since	‎03-15-2019 01:51 PM
Date Last Visited	‎05-02-2019 12:46 PM
Posts	12

User Statistics

User Activity

Can't ping from one 2960X to another

2960X isn't forwarding packets to Fortigate 100D

Re: Can't ping from one 2960X to another

Re: Can't ping from one 2960X to another

Re: 2960X isn't forwarding packets to Fortigate 100D

Re: 2960X isn't forwarding packets to Fortigate 100D

Re: 2960X isn't forwarding packets to Fortigate 100D