Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have several 3500XL switches in our network along with newer models capable of running PVRST+. Of course the 3500XL switches can only run PVST+ mode, which is what all the other switches are curently running. We would like to switch our environm...
Our wireless network consists of Wireless LAN Controllers and multiple APs. We require 802.1x authentication on our SSID. We use IAS as our authentication server for both machines and users. Each device connecting to our WLAN is required to have a...
I am having a problem setting up a L2L tunnel with a partner. I am using a ASA 5520 running 8.0.4. Both sides of the tunnel are using the subnet 10.30.x.x/16. The network list on my side of the tunnel will have the nodes 10.0.194.1, 10.0.194.5, 10.0....
I am having a problem setting up a L2L tunnel with a partner. I am using a ASA 5520 running 8.0.4. Both sides of the tunnel are using the subnet 10.30.x.x/16. The network list on my side of the tunnel will have the nodes 10.0.194.1, 10.0.194.5, 10.0....
I am having a problem setting up a L2L tunnel with a partner. I am using a ASA 5520 running 8.0.4. Both sides of the tunnel are using the subnet 10.30.x.x/16. The network list on my side of the tunnel will have the nodes 10.0.194.1, 10.0.194.5, 1...
This sounds pretty close to what we want to accomplish here. Would you be willing to email me the configs of your routers and ASA, with the appropriate information removed of course? I have been looking for example configurations with two address s...
Billy,As I noted in the previous message, this is what I was thinking of putting into service for us. But, now I am having second thoughts. Maybe running eigrp or ospf on the outside would be a better idea. I am also working on trying to eliminate...
I am looking to do something very similar in our network. Please see attached visio for an example of something that might work in your case as well.. I am also wondering if this would be a viable solution for multihoming bgp with in-continguous ad...
Thanks for the reply, but that is not it. I realize that pvrst and Rapid pvst are the same. However, the 3500xl switches will not support pvrst, but a 3750 and a 6509 does. If the 6509 is connected to some 3750 switches and 3500xl switches, can I ...
