Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody, I started having issues with the routers displaying "no authorization entry found for <router ip> <username>".I can SSH to the routers using the local accounts, the network accounts do not work. When I do SSH or console in with the...
Hello everyone. I have two WAP 571s brand new in the box that I need to deploy. They're connected to a WS-C2960-48PST-L but the 571s just dont stay up. They cycle on and off and the port light is a solid amber. The port was err-disabled but I shu...
Hello everyone,We're migrating several sites in the enterprise and will move to stacking 9300 series switches together (from stand-alone 2960s et al) and replacing 2800 series routers to ISR 4321s.The question is, how do I connect two or three stacks...
Hello everyone, new to cisco switching. How do I assign an IP address and subnet to a new C2960X? All the examples I have seen say to config VLAN1, but, my organization does not use VLAN 1, in fact, this is what they all look like interface Vlan1no ...
Richard, here's the rest of the configuration that is towards the bottom of the running-config: tacacs-server host <IP>tacacs-server host <IP>tacacs-server timeout 1tacacs-server key 7 <key>radius-server host <IP> auth-port 1645 acct-port 1646 key 7 ...
Richard, I inherited this mess about 4 months ago. I was only clearing out IP routes to sites that no longer exist, and thats all that was deleted (all the routes are static, no OSFP/BGP). I certainly didn't mess with radius. The deletion of the r...
Giuseppe, thank your for the reply. There is no TACACS or TACACS+ Server. Authentication is done through radius on a windows serer 2012 server. I can login with the local accounts but I get the "no authorization" error, so I know its not talking t...
Thanks all for the replies. I guess I didnt explain myself. I know that I have to stack the switches together using stackwise, and will do so. My question is, how do I connect three switch stacks via multimode fiber to the ISR4321 when I only have ...
