Not sure if this helps anyone but my issue was with the dACL in ISE where I had a duplicate entry for a host. The 9200 switch platform did not know how to read the dACL due to the second entry and therefore displayed the error. Once I remove the dupl...
Hi All,I know this is an old thread but I had this same issue.A show lldp neighbors shows me the Cisco AP's and for some reason show cdp neighbors wouldnt show me anything.Hope this helps
Same issue here. On 17.6.5. %SESSION_MGR-5-FAIL: Switch 1 R0/0: sessmgrd: Authorization failed or unapplied for client on Interface GigabitEthernet1/0/27 AuditSessionID . Failure Reason: ACL FailureAnybody ever find a solution?
Hi,I am having a similar issue where we are connecting switches in two racks close to each other on single mode fibre. The link does not come up on 10g-LR (assuming they are too powerful). Is there a 10G single mode SFP that is recommended for very s...