Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to deploy a dACL from our RADIUS server, I see the dACL being received by the switch, but for some reason it's not present when I run "show ip access-list" or if I look at the access-lists applied to the interface. I also don't see it appl...
We have a core and edge switch connected via dual 10g fiber and had some strange connectivity issues on devices connected to the edge switch. We found that the port-channel on the core was never configured and we only had (2) individual 10g fiber por...
New to Nexus Data Broker and trying to configure RADIUS login with a 3rd-party RADIUS server. I'm seeing successful authentications in the logs on both sides, but after it begins redirecting me to the dashboard, it kicks me back to the login page. No...
Thank you all for the help, we were able to figure out the issue. The dACL we were pushing had some invalid lines that was preventing it from applying properly. First, the ACL is "in" only, and in such, the source must always be the connected device ...
I do, but you're right it isn't showing properly for that specific client / port - Buildsw6#show ip device tracking allGlobal IP Device Tracking for clients = EnabledGlobal IP Device Tracking Probe Count = 3Global IP Device Tracking Probe Interval = ...
Thank you for the feedback, the config has been corrected and all services are operating normally now - I was more curious of what potential issues could result in this scenario, STP is definitely something to check on. Both ports were active, but i ...
