Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two hubshub1 was connected to four pcpc1-192.168.10.11pc2-192.168.10.12pc3-192.168.10.13pc4-192.168.10.14hb2 was connected to four pcpc5-192.168.10.15pc6-192.168.10.16pc7-192.168.10.17pc8-192.168.10.18 i want pC1 should ping pc5pc1 should not ...
I have createda five vlans in a switch 3650vlan1 10.10.2.0/24vlan2 10.10.1.0/24vlan 11 192.168.0.0/24vlan99 10.10.99.0/24vlan10 10.10.0.0/24 But i am not able to open switch through putty can you do it in brief
nt vlan 52ip access-group TEST inip access-group TEST outInt vlan 42ip access-group TEST inip access-group TEST outip access-list extended TESTpermit ip 10.10.56.0 0.0.0.255 anypermit ip any 10.10.56.0 0.0.0.255deny ip 10.10.42.0 0.0.0.255 10.10.56.0...
i have configured the vlan1 as 10.10.0.31 to the switch 2960now i want to disable the vlan1 and create a new vlan99 and route the traffic through that vlancan any body give me the answer how to do the following steps
interface Vlan1ip address 10.10.2.1 255.255.255.0!interface Vlan2ip address 10.10.1.1 255.255.255.0!interface Vlan10ip address 10.10.0.1 255.255.255.0!interface Vlan99ip address 10.10.99.1 255.255.255.0! then what is the ip address to communicate wit...
