cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
197
Views
0
Helpful
2
Replies
Beginner

configuting vlan1

i have configured the vlan1 as 10.10.0.31 to the switch 2960

now i want to disable the vlan1 and create a new vlan99 and route the traffic through that vlan

can any body give me the answer how to do the following steps

2 REPLIES 2
VIP Mentor

Re: configuting vlan1

Hello,

 

2960#conf t

2960(config)#int vlan 1

2960(config-int)#shut

2960(config-int)#exit

2960(config)#interface Vlan 99

2960(config-int)#ip address x.x.x.x y.y.y.y

Highlighted
VIP Advisor

Re: configuting vlan1

Hello


@ramakanth wrote:

i have configured the vlan1 as 10.10.0.31 to the switch 2960

now i want to disable the vlan1 and create a new vlan99 and route the traffic through that vlan

can any body give me the answer how to do the following steps


If this switch is going to be your core switch then the following example:

conf t

int vlan 1

shut

 

int vlan 30

ip address 10.10.10.31 255.255.255.0

no shut

exit

vlan 99

exit

ip routing

If this is just a access switch same as above but disable ip routing and provide it with a default gateway.

no ip routing

ip default-gateway 10.10.10.x <--- ip address of core switch vlan 99

 



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
CreatePlease to create content
Content for Community-Ad
Ask the Expert French- routing protocols